Wydawnictwo Uniwersytetu Przyrodniczego w Poznaniu

Biblioteka Uniwersytetu Przyrodniczego w Poznaniu

Nauka Przyroda Technologie

Polska Bibliografia Naukowa

AGRO

Arianta

Index Copernicus Journal Master List

CAB Abstracts

Ebsco

Google Scholar

Creaive Commons

Creative Commons licence CC BY-NC (Attribution-NonCommercial)
Issue 5 (1) 2006 pp. 163-171

Danuta Nicewicz, Jerzy Pawlicki, Piotr Borysiuk, Aleksander Zado

APPLICATION OF WASTE PAPER IN MANUFACTURING OF PARTICLEBOARDS

Keywords: particleboards, waste paper, recycling
Abstract: One-layer particle boards with addition of particles of waste paper were manufactured. Two sorts of waste paper (mixed waste paper and waste paper bags) and two glues (urea-formaldehyde resin – UF and melamine-urea-formaldehyde one – MUF) were applied in the process. Properties of the boards (bending strength, modulus of elasticity, perpendicular tensile strength and thickness swelling after 24 h soaking in water) were examined. As a result it was found that waste paper can be a supplementary addition in the production of particleboards. Boards had sufficient properties if maximum content of waste paper should not exceed 50% (with the MUF resin) and 30% (with the UF resin).
pub/.pdf Full text available in english in Adobe Acrobat format:
http://www.forestry.actapol.net/pub/16_1_2006.pdf

For citation:

MLA Nicewicz, Danuta, et al. "APPLICATION OF WASTE PAPER IN MANUFACTURING OF PARTICLEBOARDS." Acta Sci.Pol. Silv. 5.1 (2006): 163-171.
APA Danuta Nicewicz, Jerzy Pawlicki, Piotr Borysiuk, Aleksander Zado (2006). APPLICATION OF WASTE PAPER IN MANUFACTURING OF PARTICLEBOARDS. Acta Sci.Pol. Silv. 5 (1), 163-171
ISO 690 NICEWICZ, Danuta, et al. APPLICATION OF WASTE PAPER IN MANUFACTURING OF PARTICLEBOARDS. Acta Sci.Pol. Silv., 2006, 5.1: 163-171.
Streszczenie w języku polskim:
http://www.forestry.actapol.net/tom5/zeszyt1/streszczenie-16.html